Organic certification for shrimp value chains in Ca Mau,Vietnam: a means for improvement or an end in itself?

Eco-certification has been used as a tool to mitigate adverse effects of aquaculture production and might thus be understood as a private approach to sustainable ecosystem management. In production forests in Ca Mau, Vietnam, where mangrove have suffered degradation despite legal protection, different projects have targeted reversing this trend by means of private certification using the ‘Naturland’ organic standard as a reference. So far the outcomes have, however, been proven unsatisfactory. With the aim to better understand the reasons for these poor outcomes, a survey of forty households was conducted in a production forest in Rach Goc commune, Ngoc Hien District. We evaluated farmers’ perceptions on mangrove management, the drivers guiding shrimp farming, and whether there was a difference between participants and non-participants in a former ‘Naturland’ organic project. To complement the survey, a range of stakeholders involved in shrimp value chains were interviewed to better understand the terms and benefits of certification. The results of this survey suggested that, when applied to shrimp–mangrove farming systems in production forests in Ca Mau, ‘eco-certification’ and associated benefits are not very satisfactory. The survey results revealed that certified farms do not show significant differences to non-certified farms in terms of social and environmental benefits. As far as the implementation process was concerned, the survey results showed that a failure to integrate local farmers as participants consequently resulted in households becoming ‘objects’ for certification and not project partners with equal weight and power. It appears that rather than being a tool for improvement, ‘Naturland’ certification for shrimp–mangrove farming systems in Ca Mau’s production forests has become an end in itself.     

High-resolution mass spectrometry analysis of secondary organic aerosol generated by ozonolysis of isoprene

The chemical composition of secondary organic aerosol (SOA) generated from the ozonolysis of isoprene (C₅H₈) in the presence of an OH scavenger was examined using high-resolution electrospray ionization mass spectrometry (ESI-MS) in the mass range m/z = 50–1000. The chemical composition of SOA is complex, with more than 1000 assigned peaks observed in the positive and negative ion mode spectra. Only a small fraction of peaks correspond to known products of isoprene oxidation, such as pyruvic acid, glycolic acid, methylglyoxal, etc. The absolute majority of the detected peaks correspond to highly oxidized oligomeric constituents of SOA, with an average O:C molar ratio of 0.6. The corresponding organic mass (OM) to organic oxygen (OO) ratio is 2.4. Approximately 8% of oxygen atoms in SOA are in the form of peroxides, as quantified with an iodide test. Double bond equivalency (DBE) factors, representing the sum of all double bonds and rings, increase by 1 for every 1–2 additional carbon atoms in the molecule. The number of unoxidized CC double bonds is estimated to be less than 10%; the remaining DBE is due to CO carbonyl groups. Kendrick analysis suggests that the prevalent oligomer building blocks are small carbonyls with a C₁–C₂ skeleton. Formaldehyde (CH₂O) is identified as the most common repetitive building block in the observed oligomeric compounds.     

Lead (Pb) quantification in potable water samples: implications for regulatory compliance and assessment of human exposure

Assessing the health risk from lead (Pb) in potable water requires accurate quantification of the Pb concentration. Under worst-case scenarios of highly contaminated water samples, representative of public health concerns, up to 71–98 % of the total Pb was not quantified if water samples were not mixed thoroughly after standard preservation (i.e., addition of 0.15 % (v/v) HNO₃). Thorough mixing after standard preservation improved recovery in all samples, but 35–81 % of the total Pb was still un-quantified in some samples. Transfer of samples from one bottle to another also created high errors (40–100 % of the total Pb was un-quantified in transferred samples). Although the United States Environmental Protection Agency’s standard protocol avoids most of these errors, certain methods considered EPA-equivalent allow these errors for regulatory compliance sampling. Moreover, routine monitoring for assessment of human Pb exposure in the USA has no standardized protocols for water sample handling and pre-treatment. Overall, while there is no reason to believe that sample handling and pre-treatment dramatically skew regulatory compliance with the US Pb action level, slight variations from one approved protocol to another may cause Pb-in-water health risks to be significantly underestimated, especially for unusual situations of “worst case” individual exposure to highly contaminated water.     

Atmospheric heavy metal deposition in Northern Vietnam: Hanoi and Thainguyen case study using the moss biomonitoring technique,INAA and AAS

Background, aim, and scope  

The moss technique is widely used to monitor atmospheric deposition of heavy metals in many countries in Europe, whereas this technique is scarcely used in Asia. To implement this international reliable and cheap methodology in the Asian countries, it is necessary to find proper moss types typical for the Asian environment and suitable for the biomonitoring purposes. Such a case study was undertaken in Vietnam for assessing the environmental situation in strongly contaminated areas using local species of moss Barbula indica.     

Indoor air pollution levels in public buildings in Thailand and exposure assessment

Levels of pollutants including PM2.5 and PM2.5 composition (black carbon and water soluble ions), SO(2), NO(2), CO, CO(2), and BTEX (benzene, toluene, ethylbenzene, xylene) were monitored for indoor and outdoor air at a university campus and a shopping center, both located in the Northern suburb of Bangkok. Sampling was done during December 2005-February 2006 on both weekdays and weekends. At the university, indoor monitoring was done in two different air conditioned classrooms which shows the I/O ratios for all pollutants to be below 0.5-0.8 during the weekends. However, on weekdays the ratios for CO(2) and most detected BTEX were above 1.0. The concept of classroom occupancy was defined using a function of the student number in a lecture hour and the number of lecture hours per day. Classroom 2, which had a higher occupancy than classroom 1, was characterized by higher concentrations of most pollutants. PM2.5 was an exception and was higher in classroom 1 (37 microg/m(3), weekdays) as compared to classroom 2 (26 microg/m(3), weekdays) which was likely linked to the dust resuspension from the carpeted floor in the former. Monitoring was also done in the shopping mall at three different sites. Indoor pollutants levels and the I/O ratios at the shopping mall were higher than at the university. Levels of all pollutants measured at the car park, except for toluene and CO(2), were the highest. I/O ratios of the pollutants at the mall were above 1.0, which indicates the relatively higher influence of the indoor sources. However, the black carbon content in PM2.5 outdoor is higher than indoor, which suggest the important contribution from outdoor combustion sources such as the traffic. Major sources of outdoor air pollution in the areas were briefly discussed. Exposure modeling was applied using the time activity and measured pollutant concentrations to assess the exposure of different groups of people in the study areas. High exposure to PM2.5, especially for the people working in the mall, should be of health effect concern.     

On-site rainwater harvesting and treatment for drinking water supply: assessment of cost and technical issues

Environmental Science and Pollution Research - This study assessed the performance of rainwater-harvesting systems installed for selected public utilities in the northern provinces of Vietnam where...     

Experimental and numerical study of methylparaben decomposition in aqueous solution using the UV/H2O2 process

The present paper aims at presenting a kinetic model that is supposed to result in the decomposition of methylparaben in completely mixed batch reactor (CMBR) using the UV/H₂O₂ process. The proposed model incorporates photochemical, chemical reactions and their constant rates to formulate the overall kinetic rate expressions which are integrated into MATLAB. Thus, the changes in pH values during the process of oxidation are taken into consideration. In addition, the effects of hydrogen peroxide (HP) dosage, as well as the concentration of hydroxyl radicals, are examined. Accordingly, the pseudo-first-order rate constant, its variation as functions of HP concentration, incident UV-light intensity and the limitations of the adopted approach are discussed. In line with that, the authors provided evidence of the validity of the kinetic model through the exposure of previous experimental studies as reported in the literature review then through the evidence of the present experimental data.     

Satellite monitoring for carbon monoxide and particulate matter during forest fire episodes in Northern Thailand

This study explored the use of satellite data to monitor carbon monoxide (CO) and particulate matter (PM) in Northern Thailand during the dry season when forest fires are known to be an important cause of air pollution. Satellite data, including Measurement of Pollution in the Troposphere (MOPITT) CO, Moderate Resolution Imaging Spectroradiometer aerosol optical depth (MODIS AOD), and MODIS fire hotspots, were analyzed with air pollution data measured at nine automatic air quality monitoring stations in the study area for February–April months of 2008–2010. The correlation analysis showed that daily CO and PM with size below 10 μm (PM₁₀) were associated with the forest fire hotspot counts, especially in the rural areas with the maximum correlation coefficient (R) of 0.59 for CO and 0.65 for PM₁₀. The correlations between MODIS AOD and PM₁₀, between MOPITT CO and CO, and between MODIS AOD and MOPITT CO were also analyzed, confirming the association between these variables. Two forest fire episodes were selected, and the dispersion of pollution plumes was studied using the MOPITT CO total column and MODIS AOD data, together with the surface wind vectors. The results showed consistency between the plume dispersion, locations of dense hotspots, ground monitoring data, and prevalent winds. The satellite data were shown to be useful in monitoring the regional transport of forest fire plumes.